5.4 Perimeter and Area Estimation Charts
5.4 Perimeter and Area Estimation Charts Anonymous (not verified)The perimeter and area of a fire can be determined by using estimation charts as shown below. These charts require knowledge of the spread distance in chains and the effective windspeed in miles per hour. A fire area/size worksheet is provided to be filled out with the data collected.
EFFECTIVE WINDSPEED
Effective windspeed is the midflame windspeed, corrected for the effects of slope on fire spread. Changes in slope affect how wind influences a fire and the overall fire spread. For slopes above 20%, each additional 20% increase in slope translates to an additional 1 mph increase in the effective equivalent “upslope” component of the wind. For slopes between 20% and 40%, for example, a 1-mph slope-equivalent upslope component would be added to the flame-level wind. Between 40% and 60%, a 2-mph slope-equivalent upslope component would be added, and above 60%, flame-level winds would increase by 3 mph.
Click to view animation of slope effects on fire
Example 1 - A fire starts at point A. Given the following values, determine the fire perimeter.
rate of spread = 5 ch/h, projection time = 3 h, effective windspeed = 10 mi/h
Step 1. Use the equation for determining the spread distance (see Section 5.3).
ROS × PT = 5 ch/h × 3 h = 15 chains spread distance.
Step 2.> Look at the perimeter estimation chart. Find a spread distance of 15 chains on the vertical axis. Move your gaze across horizontally.
Step 3. Find an effective windspeed of 10 miles/hour on the horizontal axis, which is between 9 miles/hour and 11 miles/hour. Follow the column down vertically.
Step 4. Where the two lines intersect, read the number. In this case there are two numbers.
34 chains and 33 chains
Step 5. Take an average of the two values.
34.0 chains + 33.0 chains / 2 = 33.5 chains
The perimeter of the fire is 33.5 chains.
Example 2 - Determine the area of the fire in Example 1 and complete the fire area/size worksheet. The spread distance is the same, 15 chains.
Step 1. Reference the area estimation chart for a spread distance of 15 chains. Follow the row across horizontally.
Step 2. Look for an effective windspeed of 10 miles/hour, which is between 9 miles/hour and 11 miles/hour. Follow the column down vertically and read the numbers from the two windspeeds.
4.9 acres and 5.7 acres
Step 3. Take an average of the two values.
4.9 acres + 5.7 acres / 2 = 5.3 acres
The area of the fire is 5.3 acres.
Perimeter estimation for point source fires.
Area estimation for point source fires.
Fire Area/Size Worksheet
Line | Input | ||
0 | PP | Projection point | A |
1 | ROS | Rate of spread, ch/h | 5 |
2 | EWS | Effective windspeed, mi/h | 10 |
3 | PT | Projection time, h | 3 |
4 | SDF | Spread distance, ch | 15 |
Output | |||
PER | Perimeter, ch | 33.5 | |
AC | Area, ac | 5.3 |