Mandatory Standard Compliance

	Type 1	Type 2	Type 3	Type 4
Mandatory Standard Compliance¹	ANSI/OPEI B71.9–2022 or ANSI/ROHVA 1–2023	ANSI/OPEI B71.9–2022 or ANSI/ROHVA 1–2023	ANSI/OPEI B71.9–2022 or ANSI/ROHVA 1–2023	ANSI/OPEI B71.9–2022 or ANSI/ROHVA 1–2023

¹ The OHV shall conform to either the ANSI/OPEI or ANSI/ROHVA standard in effect at the time of manufacture and shall not have any modifications that cause non-compliance.

Provide comments relevant to all types:

All Types (Mandatory Standard Compliance)

Or provide comments relevant to specific types:

Type 1 (Mandatory Standard Compliance)

Type 2 (Mandatory Standard Compliance)

Type 3 (Mandatory Standard Compliance)

Type 4 (Mandatory Standard Compliance)

Minimum Number of Seats in Each Row

	Type 1	Type 2	Type 3	Type 4
Minimum Number of Seats in Each Row	2	2	2	2

Provide comments relevant to all types:

All Types (Minimum Number of Seats in Each Row)

Or provide comments relevant to specific types:

Type 1 (Minimum Number of Seats in Each Row)

Type 2 (Minimum Number of Seats in Each Row)

Type 3 (Minimum Number of Seats in Each Row)

Type 4 (Minimum Number of Seats in Each Row)

Number of Rows of Seating

	Type 1	Type 2	Type 3	Type 4
Number of Rows of Seating	2	2	1	1

Provide comments relevant to all types:

All Types (Number of Rows of Seating)

Type 1 (Number of Rows of Seating)

Type 2 (Number of Rows of Seating)

Type 3 (Number of Rows of Seating)

Type 4 (Number of Rows of Seating)

Minimum Vehicle Payload Capacity

	Type 1	Type 2	Type 3	Type 4
Minimum Vehicle Payload Capacity²	1,000 lbs.	550 lbs	1,000 lbs.	550 lbs

² Payload capacity is the total amount of weight that can be loaded on the OHV. Payload includes personnel weight, fixed equipment, and cargo. Personnel weight shall be calculated at 200 lbs. for every seatbelt position, even if unoccupied.

Provide comments relevant to all types:

All Types (Minimum Vehicle Payload Capacity)

Or provide comments relevant to specific types:

Type 1 (Minimum Vehicle Payload Capacity)

Type 2 (Minimum Vehicle Payload Capacity)

Type 3 (Minimum Vehicle Payload Capacity)

Type 4 (Minimum Vehicle Payload Capacity)

Rear Box Load Capacity

	Type 1	Type 2	Type 3	Type 4
Rear Box Load Capacity³	500 lbs. or greater	150 to 499 lbs.	500 lbs. or greater	150 lbs. to 499 lbs.

³ Rear box load rating and payload capacity shall not be exceeded.

Provide comments relevant to all types:

All Types (Rear Box Load Capacity)

Or provide comments relevant to specific types:

Type 1 (Rear Box Load Capacity)

Type 2 (Rear Box Load Capacity)

Type 3 (Rear Box Load Capacity)

Type 4 (Rear Box Load Capacity)

Four Wheel or All-Wheel Drive

	Type 1	Type 2	Type 3	Type 4
Four Wheel or All-Wheel Drive	Yes	Yes	Yes	Yes

Provide comments relevant to all types:

All Types (Four Wheel or All-Wheel Drive)

Or provide comments relevant to specific types:

Type 1 (Four Wheel or All-Wheel Drive)

Type 2 (Four Wheel or All-Wheel Drive)

Type 3 (Four Wheel or All-Wheel Drive)

Type 4 (Four Wheel or All-Wheel Drive)

Taillamp(s) and Stop Lamp(s)

	Type 1	Type 2	Type 3	Type 4
Taillamp(s)⁴ and Stop Lamp(s)⁵	Yes	Yes	Yes	Yes

⁴ The OHV shall have a minimum of one (1) red taillamp that illuminates when the headlamps are on.

⁵ The OHV shall have a minimum of one (1) red stop lamp or combination taillamp/stop lamp that activates when braking occurs.

Provide comments relevant to all types:

All Types Taillamp(s) and Stop Lamp(s)

Or provide comments relevant to specific types:

Type 1 (Tail Lamp(s) and Stop Lamp(s))

Type 2 (Tail Lamp(s) and Stop Lamp(s))

Type 3 (Tail Lamp(s) and Stop Lamp(s))

Type 4 (Tail Lamp(s) and Stop Lamp(s))

Occupant Side Retention Devices

	Type 1	Type 2	Type 3	Type 4
Occupant Side Retention Devices⁶	Yes	Yes	Yes	Yes

⁶ The OHV shall have Original Equipment Manufacturer (OEM) provided single hand operation doors or nets to prevent occupant body parts from injury in the event of an accident.

Provide comments relevant to all types:

All Types (Occupant Side Retention Devices)

Or provide comments relevant to specific types:

Type 1 (Occupant Side Retention Devices)

Type 2 (Occupant Side Retention Devices)

Type 3 (Occupant Side Retention Devices)

Type 4 (Occupant Side Retention Devices)

Personnel Protective Barrier

	Type 1	Type 2	Type 3	Type 4
Personnel Protective Barrier⁷	Yes	Yes	Yes	Yes

⁷ The OHV shall have a personnel protective barrier between the vehicle occupant seating area and cargo bed.

Provide comments relevant to all types:

All Types (Personnel Protective Barrier)

Or provide comments relevant to specific types:

Type 1 (Personnel Protective Barrier)

Type 2 (Personnel Protective Barrier)

Type 3 (Personnel Protective Barrier)

Type 4 (Personnel Protective Barrier)

Minimum Fire Extinguisher

	Type 1	Type 2	Type 3	Type 4
Minimum Fire Extinguisher⁸	1A:10B:C	1A:10B:C	1A:10B:C	1A:10B:C

⁸ The OHV shall have an accessory fire extinguisher that is mounted to be easily accessible. The fire extinguish shall not be mounted by drilling or welding to the rollover protective structure (ROPS). If mounted to the ROPS using clamps or bands, it shall be mounted exterior of the occupant seating area.

Provide comments relevant to all types:

All Types (Minimum Fire Extinguisher)

Or provide comments relevant to specific types:

Type 1 (Minimum Fire Extinguisher)

Type 2 (Minimum Fire Extinguisher)

Type 3 (Minimum Fire Extinguisher)

Type 4 (Minimum Fire Extinguisher)