Skip to main content

Medical Incident Report

 

The Medical Incident Report (MIR) can be found in the following documents: in the NWCG Incident Response Pocket Guide (IRPG), PMS 461, under Emergency Medical Care (pink); in the Medical Plan ICS-206 WF; and in many Incident Action Plans (IAPs). The MIR evolved from and has replaced the 9 Line Form and Pink sticker.

The MIR is not always tasked to the Emergency Medical Technician (EMT) or Paramedic in Patient Care. The intent of the form is to:

  1. establish control of the incident, whether routine or life-threatening, by initiating a new Incident Command System,
  2. standardize a systematic process for reporting medical incidents/injuries, similar to a fire size-up for initial attack, and
  3. enable any firefighter, with prior training and direction, to fill it out and transmit the information.
  • Treat it like any incident. If the incident is overwhelming, ask for a more qualified Incident Commander (IC) to assume command. Expand/contract the organization’s size depending on the needs of the incident.
  • Fill this report out completely prior to transmitting to dispatch/communications. If the incident is life threatening, do not let documentation delay patient care.
  • When transmitting the report, state the number and title of each section, and say “break” and pause between the sections (e.g., “Dispatch, Task Force Leader (TFLD) Jones. Standby for Priority Medical Incident Report. 1. All other radio traffic please hold, break” (pause/wait for response). “2. Incident Status: Nature of Illness is chest pain. Incident Name is Tank Medical. IC will be TFLD Jones. Patient Care will be Paramedic Smith. Break (pause again). 3. Initial Patient Assessment is…”).
  • When using the MIR during a Multi-Casualty Incident (MCI), state the number injured and their severity (Section 3: e.g., “3. Initial Patient Assessment, I have five patients. three Reds, one Yellow, and one Green. Mechanism of Injury is...”).
  • Use the terms Paramedic or EMT with the provider’s last name in “Patient Care.” Do not use EMT to describe a Paramedic or the ambiguous term Medic. All those roles need to be clearly identified to understand the level of care and treatment the patient(s) will receive.
  • Enact more than one transport plan and clear more than one frequency if needed for Sections 5 and 6.
  • Always be ready for the first plan to fail and be flexible enough to move into an alternate plan. Use the acronym PACE (Primary, Alternate, Contingency, and Emergency) for planning purposes.

Action Items:

  • Consider developing medical emergency tabletop scenarios as part of morning briefings or field scenarios on project work to be become familiar with the process. The more comfortable with the MIR you are, the more it will be second nature under stress.
  • Ensure dispatchers and radio operators are aware of their roles and responsibilities pertaining to the MIR.
  • Review your local unit emergency plans.

 

This topic was submitted by Assistant Fire Management Officer (AFMO) Miles Ellis and Asst. State Fire Management Officer (FMO) Paul Hohn with Wyoming Bureau of Land Management (BLM), and expanded upon by Eric Graff, of Grand Canyon Helitack.

 

Last Modified / Reviewed:

Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee.


Follow NWCG on Twitter and Facebook

NWCG Latest Announcements

NEW! NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053

Date: March 12, 2025
Contact: Wildland Urban Interface Mitigation Committee

The NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 provides mitigation practitioners at all experience levels with recommendations on the most effective and efficient ways to accomplish mitigation work in communities at risk to wildfire damage or destruction. The content in this guide was written in coordination with the NWCG Standards for Mitigation in the Wildland Urban Interface, PMS 052.

References:

NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 

Updated, NWCG Standards for Wildland Fire Module Operations, PMS 430

Date: March 11, 2025
Contact: Fire Use Subcommittee
Wildland Fire Module Unit

The NWCG Standards for Wildland Fire Module Operations, PMS 430 standardizes procedures and expectations for Wildland Fire Modules (WFMs). These standards are to be used by staff, supervisors, specialists, and technicians for planning, administering, and conducting WFM operations. These standards will also be used as a measure of WFM qualifications, capabilities, and expected performance, for both Type 1 and Type 2 WFMs.

References:

NWCG Standards for Wildland Fire Module Operations, PMS 430

NEW! NWCG Standards for Airtanker Operations, PMS 514

Date: March 7, 2025
Contact: National Interagency Aviation Committee

The NWCG Standards for Airtanker Operations, PMS 514 establishes the standards for dispatching, utilizing, and coordinating airtankers on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, NWCG Standards for Airtanker Base Operations (SABO), PMS 508, and any applicable agency plans.

References:

NWCG Standards for Airtanker Operations, PMS 514

Incident Position Standards and Next Gen Position Task Books Now Available for Dispatch Incident Positions

Date: March 5, 2025
Contact: National Coordination System Committee

NWCG is excited to announce that Incident Position Standards and Next Generation Position Task Books are now available for all six Dispatch positions:

  • Aircraft Dispatcher
  • Expanded Dispatch Coordinator
  • Expanded Dispatch Recorder
  • Expanded Dispatch Supervisory Dispatcher
  • Expanded Dispatch Support Dispatcher
  • Initial Attack Dispatcher

The Performance Support Packages for these positions, including the Expanded Dispatch Job Aid, J-601 and the Initial Attack and Aircraft Dispatcher Job Aid, J-602, were developed as part of the Incident Performance and Training Modernization (IPTM) effort. These resources support trainees, qualified personnel, and evaluators in their roles.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1.

References:

NWCG Aircraft Dispatcher Position Page 

NWCG Expanded Dispatch Coordinator Position Page 

NWCG Expanded Dispatch Recorder Position Page 

NWCG Expanded Dispatch Supervisory Dispatcher Position Page 

NWCG Expanded Dispatch Support Dispatcher Position Page 

NWCG Initial Attack Dispatcher Position Page 

NWCG Job Aids