Skip to main content

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Categories

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Tank – Dip, 15,000 GL (Heliwell)

NFES #
000669
Category
Water Handling
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria

  1. Observe condition prior to take down or after setting up unit following manufacturer’s assembly procedures.
    • Look at rim covers and inspect attached webbing.
    • Remove rim covers and inspect top of tank for abrasions or tears.
    • Look in tank for slices or holes and mark with felt pen if repairs needed.
    • Inspect panels to ensure they are not bent or misshapen and attached clips are functional.
    • Inspect turn buckles and cables for frays and burrs.
  2. Return to stock if unused.
  3. Refurbish item, if repairs are extensive, refer to SEI Industries website.
  4. Dispose of irreparable components and replace as necessary.

Refurbishing Procedures

A. Cleaning

  1. Clean tank liner and panels, inside and outside with soapy water and a brush or highpressure wash and rinse.
  2. Rinse well with clean water from high-pressure washer.
  3. Allow to air dry on both sides.

B. Repair

  1. Weld all cracked or broken welds on aluminum panels.
  2. Patch any damaged areas marked in liner. All patches should be welded with patch material that is recommended by the manufacturer.
  3. Rivet rim covers if missing.
  4. Straighten panels and replace clips if needed.
  5. File off burrs on turn buckles.
  6. Replace any missing or damaged fittings, valves, adapters or caps.

C. Testing for performance

  • Verify panels are close together by inspecting placement.

D. Repackaging

  1. Fold tank liner into a shape that fits underneath one panel. See Heliwell operator’s manual on SEI website.
  2. Place folded liner on a pallet and stack panel atop tank.
  3. Box other components together and place on pallet.
  4. Strap down tank, panels, and boxed components securely.

 

Reference

SEI Industries 

Water Handling Equipment Guide, PMS 447-1 

 

Share on Social Media

Print PDF

NWCG Latest Announcements

NEW! S-390, Introduction to Wildland Fire Behavior Calculations (Blended) Available Now

Date: December 22, 2025
Questions about RT-130? 
Please contact: Fire Behavior Subcommittee

NWCG is excited to announce that the new S-390, Introduction to Wildland Fire Behavior Calculations (Blended) training is now available on the Wildland Fire Learning Portal.

This third course in the series combines online and instructor-led training components aimed at individuals who are involved in planning, managing, and executing wildland fire and prescribed burn operations; who require a thorough understanding of fire behavior calculations to enhance effectiveness and safety. This includes students who require the knowledge and skill necessary to perform the duties of a Type 3 Incident Commander (ICT3), Division/Group Supervisor (DIVS), or Prescribed Fire Burn Boss Type 2 (RXB2).

Students are required to be qualified as any Single Resource Boss position and complete the prerequisite S-290, Intermediate Wildland Fire behavior (Blended) course, before enrolling in S-390.

References:

S-390, Introduction to Wildland Fire Behavior Calculations (Blended)

Wildland Fire Learning Portal

NEW! S-320, Introduction to Incident Management Teams (Blended) Available Now

Date: December 18, 2025
Questions about RT-130? 
Please contact: Incident and Position Standards Committee

NWCG is excited to announce that S-320, Introduction to Incident Management Teams (Blended) is now available on the Wildland Fire Learning Portal!

This blended course combines online learning with instructor-led training, designed for individuals seeking to build leadership skills and gain experience in incident management.

Students are required to complete the prerequisite trainings ICS-100, Introduction to Incident Command System (ICS), ICS-200, Basic ICS for Initial Response, and ICS-700, An Introduction to the National Incident Management System (NIMS) prior to attending S-320.

References:

S-320, Introduction to Incident Management Teams (Blended)

Wildland Fire Learning Portal

New! Ransom Road WFSTAR Module

Date: December 16, 2025
Questions about RT-130? 
Please contact: NWCG Audiovisual Specialist

NWCG is excited to announce the release of the new Ransom Road Fire Module to RT-130, Wildland Fire Safety Training Annual Refresher (WFSTAR).

This module features a firsthand account from Rob Lee, official reports, and animated maps of the Ransom Road Fire which occurred on June 8, 1981, in Florida's Merritt Island National Wildlife Refuge.

The module is available now in NWCG's RT-130, WFSTAR Catalog.

References:

WFSTAR Catalog

Wildland Fire Lessons Learned Center

Call for Nominations: Paul Gleason Lead by Example Award

Date: December 11, 2025
Questions? Please contact:
 Leadership Committee 

Do you know someone working in wildland fire who strives to make positive change and is undeterred by obstacles or setbacks? Now is your chance to give that person the acknowledgment they deserve by nominating them for a Paul Gleason Lead by Example Award.

This award, is presented by the NWCG Leadership Committee to remember Paul Gleason's contributions to the wildland fire community and to recognize individuals or groups that exhibit the same spirit and dedication to leadership – those who lead by example.

Nominations can be submitted via email with an attached Lead by Example Form to BLM_FA_Leadership_Feedback@blm.gov or through the online form. 

Tips for successful nominations and more information can be found on the Lead by Example webpage. All nominations must be submitted by December 31, 2025.

References:

Paul Gleason Lead By Example Award 

Paul Gleason Lead by Example Award Nomination Form 2025 

Leadership Committee