Skip to main content

PMS 936-1

NWCG Geographic Information System Specialist (GISS) Workflow, PMS 936-1

The NWCG Geographic Information System Specialist (GISS) Workflow, PMS 936-1, is supplemental to the NWCG Standards for Geospatial Operations (GeoOps), PMS 936.

The NWCG GISS Workflow, PMS 936-1, is developed and maintained by the NWCG Geospatial Subcommittee (GSC) under the direction of the Data Management Committee (DMC), an entity of NWCG. While previous versions may contain current or useful information, they are obsolete. The user of this information is responsible for confirming they have the most up-to-date version. NWCG is the sole source for the publication.

Comments, questions, and recommendations shall be submitted to the appropriate agency member assigned to the GSC. View the complete roster.

NWCG GISS Workflow Diagram

Image
GIS Workflow, explained below

Figure 1. GIS Workflow
(click image to open larger)

The NWCG GISS Workflow provides three levels of detail, which are scalable to the user. The graphic shows the basic order of operations, followed by an outline of the major steps and essential process details, and finally, the links in the outline and the navigation pane lead the user to detailed process instructions and documentation (see Figure 1).

Definitions:

Offline Copy

The Mobile Geodatabase (GDB) is created when the user runs the Download Map function. This is a copy of the National Incident Feature Services (NIFS) data that can be edited and synchronized. Sync works both ways and an Offline Copy can be synced multiple times; the Offline Copy should always be synchronized before an edit session (to pull down new data) and after an edit session (to push up new edits).

Note that this is not the same GDB used for map creation.

Master Incident GDB

The most current GDB named per GeoOps standards ({year}_{incident name}_{unit ID + local incident ID}) and placed in the incident_data folder to be used as the source for all incident maps. This GDB should not be edited.

Pro Project Template

The ArcGIS Pro project (.aprx) file included in the GeoOps Folder structure under projects. ‘Save As’ should be used on this template to create the Edit Project and all Master Projects. Implementation instructions can be found in the tools folder in the Prepare and Configure the Event GDB document.

Edit Project

The ArcGIS Pro project (.aprx) used for creating and editing the Offline Copy. Editing should not be done in any project used for map creation. This project stores the configured Feature Templates.

Master Project

The current ArcGIS Pro project (.aprx) for each map project. Master Projects can contain multiple layouts for the same map view, but each should be for only a single project type (e.g., All division maps in one project or multiple sizes of the PIO map in one project). Daily backups should be made of each Master Project.

Data Preparation – Do Once

  1. Gather incident information – Name, Unique Fire ID (Unit ID + Local Incident Number), IRWINID, etc.
  2. Implement the GeoOps Incident Directory Structure. Download the zip folder, extract the YYYY_Template folder, and rename for incident.
  3. Populate the base_data folder with data relevant to the fire area.
  4. Configure the Pro Project Template.
    1. Rename project databases.
    2. Rename map view with incident name and set local projected coordinate system.
    3. Repair path of Dynamic Text Update table to other_incident_gdb.
  5. Save as on the Pro Project Template to create the Edit Project. Name per GeoOps standards {map type} = “edit”.
    1. Ensure you are signed into the NIFC AGOL as your active portal.
    2. Optionally, add a vector tile layer basemap to map.
    3. Create an Offline Copy.
      1. Add the National Incident Feature Service (NIFS).
      2. Zoom to incident area of interest (AOI).
      3. Select Download Map to create an Offline Copy. Optionally, download a vtpk of the vector tile layer simultaneously.
    4. Repair path of Event Layers to Offline Copy and remove duplicate service from map.
    5. Configure Feature Templates.
    6. Save a group layer file for Event Features in the incident_data/edit folder and include your name.
  6. Create and Share Web Maps for mobile data collection and information sharing.

Edit Incident Data – Repeat as Necessary

  1. Edit the NIFS (Offline Copy).
    1. Secure information through the Situation Unit Leader (SITL) to create/edit incident data.
    2. Process/Convert/Import incoming data and store per GeoOps file structure.
    3. Open the Edit Project and sync Offline Copy. Edit incident data (only edit your incident).
      1. Edit the EventPolygon first. Calculate Geometries and populate attributes.
      2. Edit the PerimeterLine features to match the Wildfire Daily Fire Perimeter. Calculate Geometries and populate attributes.
      3. Edit the EventLine, EventPoint, and Accountable Property features in a logical order. Calculate Geometries and populate attributes.
      4. Edit the LabelPoint features to create assignment labels, if needed.
    4. Manage suppression repair data.
    5. Update Metadata in the DynamicTextUpdate table.
    6. Save data edits, sync Offline Copy, and save Edit Project.
    7. Export the latest fire perimeter to a progression GDB for use in progression maps.
    8. Calculate containment, ownership acres, etc.

Update the Master Incident GDB – Done After Every Edit Cycle

  1. Back up Offline Copy.
    1. Determine the path and name of the Offline Copy.
    2. Convert the Offline Copy (mobile GDB) to a backup GDB (file GDB).  Save into the daily backup folder under incident_data\backups and name following GeoOps.
  2. Create or Replace Master Incident GDB.
    1. If Master Incident GDB already exists, delete from \incident_data.
    2. Copy the backup GDB to the \incident data folder and rename it following GeoOps to become the new Master Incident GDB.

Create Incident Maps and Digital Products – Repeat as Necessary

  1. Create or Update Incident Map(s).
    1. Use an existing Master Project or open the Pro Project Template and Save As to create a new Master Project per the GeoOps.
    2. Repair path of Event layer file(s) to point to the Master Incident GDB.
    3. Add base maps and ancillary datasets to map.
    4. Create a layout or make a copy of a provided layout template for the desired map product.
    5. Apply definition queries to display only the Event Features appropriate for the intended map audience.
    6. Use dynamic labeling where applicable and create annotation as necessary.
    7. Ensure all essential map elements are present and correct (STANDL SGD).
    8. Export Geospatial PDF map per GeoOps standards.
  2. Create and share public web products.

Back Up and Sharing – Repeat as Necessary

  1. Back up incident data.
  2. Share digital map products by posting to the NIFC FTP site or designated SharePoint folder nightly. Use QR codes if desired.

**** If additional NIFS edits are needed the Master Incident GDB should not be edited. Only the Offline Copy should be edited.****

The National Wildfire Coordinating Group (NWCG) provides national leadership to enable interoperable wildland fire operations among federal, state, Tribal, territorial, and local partners. NWCG operations standards are interagency by design; they are developed with the intent of universal adoption by the member agencies. However, the decision to adopt and utilize them is made independently by the individual member agencies and communicated through their respective directives systems.

 

 
 
Next Step ˃˃
 

Share on Social Media

Last Modified / Reviewed:

Print PDF

NWCG Latest Announcements

NEW! S-390, Introduction to Wildland Fire Behavior Calculations (Blended) Available Now

Date: December 22, 2025
Questions about RT-130? 
Please contact: Fire Behavior Subcommittee

NWCG is excited to announce that the new S-390, Introduction to Wildland Fire Behavior Calculations (Blended) training is now available on the Wildland Fire Learning Portal.

This third course in the series combines online and instructor-led training components aimed at individuals who are involved in planning, managing, and executing wildland fire and prescribed burn operations; who require a thorough understanding of fire behavior calculations to enhance effectiveness and safety. This includes students who require the knowledge and skill necessary to perform the duties of a Type 3 Incident Commander (ICT3), Division/Group Supervisor (DIVS), or Prescribed Fire Burn Boss Type 2 (RXB2).

Students are required to be qualified as any Single Resource Boss position and complete the prerequisite S-290, Intermediate Wildland Fire behavior (Blended) course, before enrolling in S-390.

References:

S-390, Introduction to Wildland Fire Behavior Calculations (Blended)

Wildland Fire Learning Portal

NEW! S-320, Introduction to Incident Management Teams (Blended) Available Now

Date: December 18, 2025
Questions about RT-130? 
Please contact: Incident and Position Standards Committee

NWCG is excited to announce that S-320, Introduction to Incident Management Teams (Blended) is now available on the Wildland Fire Learning Portal!

This blended course combines online learning with instructor-led training, designed for individuals seeking to build leadership skills and gain experience in incident management.

Students are required to complete the prerequisite trainings ICS-100, Introduction to Incident Command System (ICS), ICS-200, Basic ICS for Initial Response, and ICS-700, An Introduction to the National Incident Management System (NIMS) prior to attending S-320.

References:

S-320, Introduction to Incident Management Teams (Blended)

Wildland Fire Learning Portal

New! Ransom Road WFSTAR Module

Date: December 16, 2025
Questions about RT-130? 
Please contact: NWCG Audiovisual Specialist

NWCG is excited to announce the release of the new Ransom Road Fire Module to RT-130, Wildland Fire Safety Training Annual Refresher (WFSTAR).

This module features a firsthand account from Rob Lee, official reports, and animated maps of the Ransom Road Fire which occurred on June 8, 1981, in Florida's Merritt Island National Wildlife Refuge.

The module is available now in NWCG's RT-130, WFSTAR Catalog.

References:

WFSTAR Catalog

Wildland Fire Lessons Learned Center

Call for Nominations: Paul Gleason Lead by Example Award

Date: December 11, 2025
Questions? Please contact:
 Leadership Committee 

Do you know someone working in wildland fire who strives to make positive change and is undeterred by obstacles or setbacks? Now is your chance to give that person the acknowledgment they deserve by nominating them for a Paul Gleason Lead by Example Award.

This award, is presented by the NWCG Leadership Committee to remember Paul Gleason's contributions to the wildland fire community and to recognize individuals or groups that exhibit the same spirit and dedication to leadership – those who lead by example.

Nominations can be submitted via email with an attached Lead by Example Form to BLM_FA_Leadership_Feedback@blm.gov or through the online form. 

Tips for successful nominations and more information can be found on the Lead by Example webpage. All nominations must be submitted by December 31, 2025.

References:

Paul Gleason Lead By Example Award 

Paul Gleason Lead by Example Award Nomination Form 2025 

Leadership Committee