Skip to main content

6MFS

6MFS Committee

All 6MFS Topics

6MFS Calendar

Aviation

Airtankers

Felling Safety

Fire Communication

Firefighter Health & First Aid

Leadership

Misc Fireline Hazards

Operational Engagement

This Day in History

Vehicles - Roads

Weather - Fire Behavior

Week of Remembrance

Dozer/Plow Operations

Dozers and tractor plows provide suppression and support capability for fire operations. When working on or around dozers on the fireline, it is important to respect the following guidelines:

  • Load/unload equipment from the transport in a safe manner on a level, stable surface.
  • Park transport in an area free of vegetative fuel. Clear an area if needed to protect parked equipment.
  • Do not sit or bed down near equipment. Walk around the equipment before starting or moving it.
  • Lower the dozer blade and/or fire plow to the ground when the equipment is idling or stopped.
  • When working around a dozer or tractor plow, stay at least 100 feet in front or 50 feet behind the equipment.
  • Allow no one but the operator to ride on the equipment.
  • Never get on or off equipment while it is moving.
  • Provide front and rear lights for equipment working at night or in heavy smoke.
  • Provide lights and fluorescent vests to personnel working with dozer/tractor plow units.
  • Use hand signals for direction and safety.
  • Do not use a dozer or tractor plow without a canopy or brush guard and radio communications.
  • Operators will wear required personal protective equipment (PPE) and carry a fire shelter.
  • Be aware of different fuel types, rates of spread, and flammability.
  • Watch for wetlands, steep slopes, rocks, ditches, and other obstacles that might stop the equipment.
  • Do not get too far ahead of a firing crew during firing operations.
  • Anchor the line to a secure firebreak and create a black line (burn out) until the fire is completely enclosed.
  • Tractor plow operators should wear headgear protection for head, face, eyes, and ears while also providing radio reception and ventilation capabilities.
  • Tractor plow crews should consist of a minimum of two people.
  • When the dozer or tractor plow is equipped with a hand-clutch lever, always take equipment out of gear when mounting and dismounting.

 

Category
Vehicles Roads
References
Safety and Occupational Health Manual Handbook, BLM-1112-1

Last Modified / Reviewed:

Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee.


Follow NWCG on Twitter and Facebook

Print PDF

NWCG Latest Announcements

NEW! NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053

Date: March 12, 2025
Contact: Wildland Urban Interface Mitigation Committee

The NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 provides mitigation practitioners at all experience levels with recommendations on the most effective and efficient ways to accomplish mitigation work in communities at risk to wildfire damage or destruction. The content in this guide was written in coordination with the NWCG Standards for Mitigation in the Wildland Urban Interface, PMS 052.

References:

NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 

Updated, NWCG Standards for Wildland Fire Module Operations, PMS 430

Date: March 11, 2025
Contact: Fire Use Subcommittee
Wildland Fire Module Unit

The NWCG Standards for Wildland Fire Module Operations, PMS 430 standardizes procedures and expectations for Wildland Fire Modules (WFMs). These standards are to be used by staff, supervisors, specialists, and technicians for planning, administering, and conducting WFM operations. These standards will also be used as a measure of WFM qualifications, capabilities, and expected performance, for both Type 1 and Type 2 WFMs.

References:

NWCG Standards for Wildland Fire Module Operations, PMS 430

NEW! NWCG Standards for Airtanker Operations, PMS 514

Date: March 7, 2025
Contact: National Interagency Aviation Committee

The NWCG Standards for Airtanker Operations, PMS 514 establishes the standards for dispatching, utilizing, and coordinating airtankers on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, NWCG Standards for Airtanker Base Operations (SABO), PMS 508, and any applicable agency plans.

References:

NWCG Standards for Airtanker Operations, PMS 514

Incident Position Standards and Next Gen Position Task Books Now Available for Dispatch Incident Positions

Date: March 5, 2025
Contact: National Coordination System Committee

NWCG is excited to announce that Incident Position Standards and Next Generation Position Task Books are now available for all six Dispatch positions:

  • Aircraft Dispatcher
  • Expanded Dispatch Coordinator
  • Expanded Dispatch Recorder
  • Expanded Dispatch Supervisory Dispatcher
  • Expanded Dispatch Support Dispatcher
  • Initial Attack Dispatcher

The Performance Support Packages for these positions, including the Expanded Dispatch Job Aid, J-601 and the Initial Attack and Aircraft Dispatcher Job Aid, J-602, were developed as part of the Incident Performance and Training Modernization (IPTM) effort. These resources support trainees, qualified personnel, and evaluators in their roles.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1.

References:

NWCG Aircraft Dispatcher Position Page 

NWCG Expanded Dispatch Coordinator Position Page 

NWCG Expanded Dispatch Recorder Position Page 

NWCG Expanded Dispatch Supervisory Dispatcher Position Page 

NWCG Expanded Dispatch Support Dispatcher Position Page 

NWCG Initial Attack Dispatcher Position Page 

NWCG Job Aids