Skip to main content

First Use of a Helicopter for Firefighting – June 26th, 1946

This Day in History is a brief summary of a powerful learning opportunity and is not intended to second guess or be judgmental of decisions and actions. Put yourself in the following situation as if you do not know the outcome. What are the conditions? What are you thinking? What are YOU doing?

Summary:

The helicopter has proven to be a valuable tool in wildland fire operations and support for many years, transporting firefighters, moving cargo and equipment, dropping water and retardant, flying reconnaissance and observation missions,  aerial ignition work, long lining, and simply providing eyes-in-the-sky fire  information to the incident commander or burn boss. There are few fires where this aviation resource is not utilized in some capacity.

You would think that the value of the helicopter would have been recognized from the outset but on the contrary. Helicopters were considered “far from perfect” and at the time (WWII) almost impossible to obtain. Nearing the end of WWII Sikorsky was delivering many models of helicopter to several branches of the military and receiving orders for more; all other orders were low priority. Forest managers continued to watch the development of helicopters and contemplated how they might be used post-war.

1943 – Ontario Canada’s Department of Lands and Forests (DLF) makes inquiries about the purchase of a helicopter for experimental purposes on wildland fires. They were denied due to lack of availability. British Columbia Forest Service continues to look at the practicality of using helicopters for moving firefighters and gear into the mountains for lightning fires.

1945 – Canada’s DLF contacts Sikorsky and is told that there will be modified versions of the military R5 available very soon and that they will be suitable for the forestry missions needed.

April 1946 – the US Forest Service and several other agencies in California view an Army Sikorsky R5 perform firefighting operations. Having limited capacity and range as well as being expensive, it was not considered to be developed enough for firefighting use.

May 1946 – Bell Helicopters certifies the world’s first commercial helicopter, the Bell 47, and continues to look at using helicopters for forest fire suppression.

June 1946 – A Bell 47 is flown for DLF on a geophysics survey and is seen by a Fire Protection Supervisor while on the fireline. Instantly recognizing the benefit of seeing the fire from above he drives to the landing zone to find out if he could use it for his fire. The pilot Gerald (Jay) Demming in the Bell 47 flies the Forest Supervisor on a fire perimeter recon and lands near a problem area making the flight the first use of a helicopter for wildland fire operations.

Summer 1946 – Alaska Fire Service uses helicopters for fire recons and Military helicopters are used on Southern California fires for mapping and gear transport.

1947 – Angeles National Forest is the first to contract helicopters for comprehensive firefighting duties.


A Bell helicopter

The Bell Helicopter 1947

Discussion Points:

The summer of 1946 marked the beginning of a long relationship between wildland fire and helicopters, one that would be marked by many tragic events. Everything was new and lessons were often learned the hard way. The SAFECOM system today helps get the word out to aviation users about many lessons learned. You can query by Agency/location and find out what lessons have been learned in your area and much more.

  • What other sources of information are available to us today to help us learn what has already been learned by someone else?

It is not uncommon for firefighters not trained in helicopter operations to assume their safety in and around the aircraft is being well managed by the aviation specialists, and it is BUT remember that your safety is also your responsibility. 

  • Reference the Aviation Watch Out Situations in your IRPG page 52. Discuss the meaning of the watch outs and how they may apply specifically to you and your crew/unit.

 

6MFS Suggestion Form


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

Share on Social Media

NWCG Latest Announcements

2025/2026 Leadership Campaign Quarter 2 Now Available!

Date: February 13, 2026
Questions? 
Please contact: Leadership Committee

NWCG is excited to announce that the Quarter Two materials for the 2025/2026 Wildland Fire Leadership Campaign are now available! This annual initiative invites all leadership and wildland fire management students to engage with essential skills and knowledge needed to lead effectively in dynamic environments.

This quarter focuses on Leadership Level 2: New Leader (Conveying Intent). Conveying intent is a crucial leadership competency in the high-risk, dynamic environment of wildland firefighting. Months 4 - 6 will concentrate on how successfully conveying intent enhances situational awareness, promotes shared understanding, and empowers firefighters to exercise initiative and adapt to changing conditions.

References:

2025/2026 NWCG Leadership Campaign - Leadership Levels

Wildland Fire Leadership Development Program

Leadership Committee

Opportunity to Serve the Wildland Fire Community as an IPTM SME!

Date: February 10, 2026
Questions? 
Please contact: NWCG SME Specialist

NWCG is seeking experienced wildland firefighters and support personnel to serve as Subject Matter Experts (SMEs) for the Incident Performance and Training Modernization (IPTM) initiative. The intent of IPTM is to transition NWCG’s training and qualification system to a performance-based model through updated position descriptions, Incident Position Standards, Next Generation Position Task Books (Next Gen PTBs), and updates to training where needed.

NWCG is currently recruiting SMEs for the following positions:

  • Aircraft Timekeeper (ATIM)
  • Compensation/Claims Unit Leader (COMP)
  • Cost Unit Leader (COST)
  • Crew Representative (CREP)
  • Deck Coordinator (DECK)
  • Fire Effects Monitor (FEMO)
  • Field Observer (FOBS)
  • Geographic Information System Specialist (GISS)
  • Ordering Manager (ORDM)
  • Receiving/Distribution Manager (RCDM)
  • Staging Area Manager (STAM)

Projects begin April/May 2026 and require 15–20 hours per month for 6–8 months, including a five-day workshop in Boise, Idaho this May. Apply by February 27, 2026, at the link below and review the attached document for details.

References:

NWCG SME Interest Sign-up

IPTM Subject Matter Expert Duties and Expectations Document

Incident Performance and Training Modernization (IPTM)

NEW! M-280, Resource Advisor, Fireline (Instructor-Led) Course Available Now

Date: January 29, 2026
Questions? 
Please contact: Resource Advisor Subcommittee

NWCG is pleased to announce the new M-280, Resource Advisor, Fireline (Instructor-Led) course is now available. This training supports individuals working towards Resource Advisor, Fireline (REAF) incident qualifications.

M-280, Resource Advisor, Fireline (Instructor-Led) training prepares students to serve as a Resource Advisor, Fireline (REAF) as defined in NWCG Incident Position Standards for Resource Advisor, Fireline, PMS 350-112. This course presents scenarios that reflect the diverse challenges a REAF may encounter during an incident. Through these scenarios, participants gain hands-on experience and an understanding of REAF responsibilities in a controlled learning environment.

References:

Resource Advisor, Fireline Position Page

NWCG Position Standards for Resource Advisor, Fireline, PMS 350-112

M-280, Resource Advisor, Fireline (Instructor-Led)

Wildland Fire Learning Portal

2026 Updates to the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1

Date: January 23, 2026
Questions? 
Please contact: Incident and Position Standards Committee

The Incident and Position Standards Committee has updated the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1.

These updates address changes to incident position names and requirements for qualification, training, and experience. Updates related to the implementation of Complex Incident Management (CIM) and Incident Performance Training Modernization (IPTM) are also included.

The NWCG Wildland Fire Position Qualification Flowchart, PMS 308 has also been updated to reflect the recent changes.

References:

NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1

NWCG Wildland Fire Position Qualification Flowchart, PMS 308

IPSC Memo 26-01: January 2026 Updates to the NWCG Standards for Wildland Fire Positions Qualifications, PMS 310-1