Skip to main content

Battlement Creek Fire (Colorado) – July 17, 1976

This Day in History is a brief summary of a powerful learning opportunity and is not intended to second guess or be judgmental of decisions and actions. Put yourself in the following situation as if you do not know the outcome. What are the conditions? What are you thinking? What are YOU doing?

Incident Summary:

In 1976, Western Colorado was experiencing a severe fire season caused partly by unusual fuel conditions and heavy lightning activity during dry weather. A severe frost in June killed a high percentage of the leaves on Gambel oak trees.  After such a frost, these leaves tend to remain on the branches and are considered one of Colorado’s most flammable fuels. Ten-hour fuels were at 3-5% moisture content. A large-scale high-pressure weather pattern sat over western Colorado, allowing for local weather to be influenced by terrain and diurnal winds averaging 10 to 15 mph in the afternoon with higher gusts. The weather was fair and hot with the temperatures at Grand Junction and Rifle reaching into the mid and upper 90. A fire was reported 40 miles northeast of Grand Junction in the Battlement Creek drainage, burning over an elevation range of 6,200 to 8,400 feet on a steep west-facing slope.

Friday, July 16, at 0630, two hotshot crews from the Coconino National Forest in Arizona arrived at the Battlement Creek Fire. This was the first season and seventeenth fire for the newly formed Mormon Lake Hotshot Crew. The strategy for the fire was to prevent western and southern spread. The crews began a major burnout of the catline (dozer line) from an area of rocky bluffs (Point A) at about 1615. They worked downhill along the catline toward the Battlement Creek road at the bottom (Point C), ending about 2030. The fire made an uphill run in oak brush burning out a large portion of the drainage (from the road east to the ridgetop) in about 20 minutes. Two “impressive” fire whirls are observed between 1600 and 1700. The night shift continued the burn out (Point C to D and beyond along the road), but this segment was spotty with considerable unburned fuel remaining. Other night shift crews constructed line along the ridgetop (Point E to G). Based on Friday’s fire behavior, the E-G line was a crucial spot on the fire. At morning briefing, Saturday, July 17, 0700, the Mormon Lake crew was assigned to burn out this section of line.


1100 – Due to a delay with the helicopter, the Mormon Lake crew did not get to the base of the rock bluff (Point E) until 1100. They were instructed to improve and burn out the line from the rocky bluff to the helispot (Point E-G). The burnout squad consisted of the crew boss, squad boss, and two crew members. The rest of the crew was improving the handline down the ridgetop.

At this same time, another crew was burning out in the bottom of the draw (Point C-D). The draw burned readily, uphill toward the ridge and the Mormon Lake crew. Neither crew knew the specific location or assignment of the other.

1400 –When the Mormon Lake crew reached a third of the way from the rock bluff to the upper helispot, there was a noticeable increase in smoke from the draw below (where the other crew had been burning). The crew boss was instructed to speed up the line improvement squad, moving toward the safety zone (Point G), and to narrow down and speed up their burnout on down the ridgeline. They were to join the rest of the crew in the safety zone when the burnout was completed. Upslope winds had increased to 25-35 mph.

1425-1440 – The line improvement squad made it into the safety zone when the flame front hit the ridge. Two hundred yards back, the burnout squad radioed that they were “trapped," their escape blocked by heavy smoke and flames.

1440-1445 – The squad removed their canvas vests to cover their heads and faces, moistened the vests and their clothes with water from their canteens, and laid face down in the mineral soil of the fireline.

1448 – All four firefighters were very badly burned. Three would lose their lives.

 

Discussion Points:

Topographic image of the fire perimeter of the Battle Creek Fire area. Points of reference within the perimeter circle outlined on map show locations of base heliport, upper, lower helispots, accident site, b-26 crash site, and main fire camp location.The day prior to the burnover, an airtanker crashed during a retardant mission on the Battlement Creek Fire, killing the pilot.

  • Discuss how incidents and distractions can affect our judgment and situational awareness.

The crew all wore aluminum hardhats, canvas vests, Nomex shirts, and non-fire-resistant work pants. Fire shelters were not used. Fire shelters may have prevented serious burns and death at this incident.  Policy on issuing and carrying shelters had not been established yet. This incident became the catalyst for the mandatory use of fire shelters and fire-resistant clothing.

  • Take this opportunity to inspect, repair, or replace your personal protective equipment (PPE), including your fire shelter. Ensure that it protects you as effectively as possible.

6MFS Suggestion Form


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

Share on Social Media

Last Modified / Reviewed:

NWCG Latest Announcements

2026 Updates to the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1

Date: January 23, 2026
Questions? 
Please contact: Incident and Position Standards Committee

The Incident and Position Standards Committee has updated the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1.

These updates address changes to incident position names and requirements for qualification, training, and experience. Updates related to the implementation of Complex Incident Management (CIM) and Incident Performance Training Modernization (IPTM) are also included.

The NWCG Wildland Fire Position Qualification Flowchart, PMS 308 has also been updated to reflect the recent changes.

References:

NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1

NWCG Wildland Fire Position Qualification Flowchart, PMS 308

IPSC Memo 26-01: January 2026 Updates to the NWCG Standards for Wildland Fire Positions Qualifications, PMS 310-1

Incident Business Committee Memo 26-01: Updated Emergency Equipment Shift Ticket, OF 297

Date: January 22, 2026
Questions? 
Please contact: Incident Business Committee

The Incident Business Committee (IBC) has released Memorandum 26-01: OF 297 and 2026 Fire Use. This memo informs the wildland fire community that the updated Emergency Equipment Shift Ticket, OF 297 is available for download and can be ordered through the Great Basin Cache.

Beginning January 15, 2026 the previous version of the OF 297 form has been discontinued.

For further details, please contact your IBC representative.

References:

Incident Business Committee Memorandum 26-01

Great Basin Cache

NEW! S-390, Introduction to Wildland Fire Behavior Calculations (Blended) Available Now

Date: December 22, 2025
Questions about RT-130? 
Please contact: Fire Behavior Subcommittee

NWCG is excited to announce that the new S-390, Introduction to Wildland Fire Behavior Calculations (Blended) training is now available on the Wildland Fire Learning Portal.

This third course in the series combines online and instructor-led training components aimed at individuals who are involved in planning, managing, and executing wildland fire and prescribed burn operations; who require a thorough understanding of fire behavior calculations to enhance effectiveness and safety. This includes students who require the knowledge and skill necessary to perform the duties of a Type 3 Incident Commander (ICT3), Division/Group Supervisor (DIVS), or Prescribed Fire Burn Boss Type 2 (RXB2).

Students are required to be qualified as any Single Resource Boss position and complete the prerequisite S-290, Intermediate Wildland Fire behavior (Blended) course, before enrolling in S-390.

References:

S-390, Introduction to Wildland Fire Behavior Calculations (Blended)

Wildland Fire Learning Portal

NEW! S-320, Introduction to Incident Management Teams (Blended) Available Now

Date: December 18, 2025
Questions about RT-130? 
Please contact: Incident and Position Standards Committee

NWCG is excited to announce that S-320, Introduction to Incident Management Teams (Blended) is now available on the Wildland Fire Learning Portal!

This blended course combines online learning with instructor-led training, designed for individuals seeking to build leadership skills and gain experience in incident management.

Students are required to complete the prerequisite trainings ICS-100, Introduction to Incident Command System (ICS), ICS-200, Basic ICS for Initial Response, and ICS-700, An Introduction to the National Incident Management System (NIMS) prior to attending S-320.

References:

S-320, Introduction to Incident Management Teams (Blended)

Wildland Fire Learning Portal