Skip to main content

Technical Rescue Technician

Position Description

Introduction

The purpose of this position is to act as an emergency responder, and to perform, under direct supervision, technical search, rescue and/or recovery operations in a vertical or near vertical environment of an incident.

Duties

  • Participates as a team member in emergency situations involving technical search or rescue operations.  Performs search, rescue, and recovery operations in a vertical or near vertical environment.
  • Utilizes appropriate technical equipment and techniques in performing search, rescue, and recovery operations.
  • Provides emergency medical treatment within the scope of certification and training.
  • Documents locations of alerts, clues, and follow-up tasks.  Cooperates with and assists other search and rescue resources.  Ensures adherence to all safety procedures.
  • Utilizes, maintains, and performs minor repair for all issued equipment.
  • Participates in briefings, receives situation reports and stays informed of mission objectives and status changes.
  • As directed, participates in hasty searches, grid searching for evidence or clues, aerial searches, helicopter rescue operations, etc.
  • Performs additional tasks or duties as assigned during a mission.

Knowledge Required By Position

  • Basic knowledge of the Incident Command System (ICS), and the development and use of integrated action planning concepts and processes.
  • Practical knowledge of technical strategies and techniques, including the construction and maintenance of rigging systems, operating raise and lower systems, rigging and operating mechanical advantage systems, managing rope as it moves through a system, managing and assisting litters, rigging anchor systems, and ascending and descending fixed lines.
  • Knowledge of technical search equipment, and the ability to operate and maintain a variety of search, rescue, and recovery equipment and maintain proficiency as technology changes.
  • Basic knowledge of search, rescue, and recovery operations and techniques, including area sectoring, search patterns, victim location clues, hazard awareness, weather implications, search team organization and operating procedures.
  • Knowledge of technical search and rescue operation acquired through successful completion of an approved National Park Service Technical Search and Rescue course or equivalent.
  • Ability to provide emergency medical treatment as a first responder.
  • Knowledge of Personal Protective Equipment (PPE), and its appropriate use in search, rescue, and recovery operations.
  • Thorough knowledge of situational awareness fundamentals including personal equipment, essential rescue equipment, and general all-risk hazards.
  • Practical knowledge of the technical aspects of search theory, including map, compass, and GPS techniques, ability to accurately sketch a search area, and recognize and identify victim location clues.

Supervisory Controls

Work direction is provided by the Technical Team Leader or other designated supervisor.  The majority of work is performed as a member of a technical rescue team or other all-risk operational team within the framework of established practice.  Technical rescue work is performed under close supervision.  Work is subject to periodic observation for acceptability and compliance with operating instructions and procedures.

Guidelines

Procedures for doing the work have been established and a number of specific guidelines or standard orders are available such as oral instructions, standard operating procedures, maps, instruction manuals, and health and safety codes.  Occasional problems may not be specifically covered by guidelines.

The incumbent uses judgment in locating and selecting the most appropriate guidelines, references, and procedures based on the situation at hand, and individual park rules and regulations.

Complexity

The incumbent works in a wide variety of functional areas which require diverse skills, often involving critical lifesaving situations such as search and rescue, emergency medical and aviation incidents.  Emergency response often involves decision-making and action in extremely adverse physical and emotional conditions and ability to function effectively in controversial and/or sensitive situations.  Work requires application and modification of established practices in some areas of responsibility, with individual discretion and judgment exercised in emergency situations.

Scope and Effect

The purpose of this position is to participate in technical search and rescue operations, to assist in implementing incident objectives for a safe operation, and to work for short to extended periods of time during SAR operations.

The Technical Team Members decisions and actions impact the safety and efficiency of assignments and enhance operational capability and mission accomplishments.

Personal Contacts

Personal contacts are with local agency search and rescue team personnel, and/or incident management team personnel during the duration of the incident. 

Purpose of Contacts

The purpose of contacts is to obtain briefings and orders, as well as to relay incident information to and from the incident management team and other team members, and to provide general and specific information and assistance.

Physical Demands

Work routinely involves physically rigorous assignments and strenuous activity.  Incumbent must maintain excellent physical condition to carry out responsibilities, including the ability to hike and climb in mountainous and desert terrain, to perform lengthy search, rescue and recovery missions, to perform assignments in remote areas of steep, hazardous terrain, accessible only by foot, and in all weather conditions.  These routine and emergency situations often require clear reasoning and decisive action under conditions of extreme mental and physical stress.

Work Environment

Work environment is predominately outdoors in all types of terrain conditions, night or day, including in inclement weather, and for prolonged periods of time.  Travel may be by foot, ski, snowshoe, vehicle, aircraft or boat.  The incumbent is subject to cold, hot, windy, wet, or snowy conditions for several days at a time.  Working elevations range from below sea level to above 8,000 feet.

 

NWCG Latest Announcements

ETC Bulletin 25-001: Retrofitted Hot/Cold Beverage Kits - 2025 Field Season

Date: April 16, 2025
Questions?  Please contact:
Equipment Technology Committee

Due to spout failures and the associated risk of burn injuries, manufacturers have retrofitted the Hot/Cold Beverage Kits using a heat-shrinking band to secure the black spout at the insertion site. The updated kits feature a fluorescent label on each full kit assembly for easy identification. Catering units are encouraged to confirm the clear heat-shrinking bands are intact around each spout before filling.

ETC Bulletin 24-001 regarding Hot/Cold Beverage Kits has been archived and replaced by ETC Bulletin 25-001 for the 2025 season.

References:

NWCG Alerts

ETC-EB-25-001 Retrofitted Hot/Cold Beverage Kits

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412