Skip to main content

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Categories

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Bag – Slingable, Water, Drinking, 55 GL (208.2L)

NFES #
000435
Category
Water Handling
Updated
Storage and Shelf Life Checks
None

This item is being phased out of the cache system

Initial Inspection/Disposal Criteria

1. Dispose of Cordura outer bag if there are: 

  • Any holes, cuts, tears, burns, or torn seams not economically repairable.
  • Any zipper or Velcro closures that do not close properly.
  •  Unsightly dirt or fuel stain that cleaning cannot eliminate.
  • Buckle does not function properly (repair, replace, or dispose).
  • Fill and drain hardware.
    •  Inspect fill and drain fittings for proper function and tight seal.
    • Replace or repair any part missing or damaged.
  • Liners:
    • Remove and dispose of any used liners.
    • Inspect condition of spare liner. Unless the integrity of the liner is in question, do not remove from the sealed bag to make this inspection.
  • Return to stock if all components are accounted for and the bag is clean and unused.
  • Refurbish if dirty or used and repairs can be made.
  • Dispose of item if it fails inspection or is damaged beyond repair.

A. Cleaning – CLASS 2 CORDURA (MACHINE WASH OK)

  1. Allow any mud or loose dirt to dry, and remove using a stiff-bristle brush. If stains remain, wash as recommended below.
  2.  Remove light oil and dirt stains by brushing with a solution of warm water and a mild detergent, rinse thoroughly, and hang to dry. “Mild detergents” includes most home laundry detergents that contain no chlorine bleach or added scents.
  3. For heavier oil or grease, soak in water-soluble biodegradable degreaser for at least 30 minutes, brush with a bristle brush, rinse thoroughly, and hang to dry.
  4. If machine washing, use only cold water on a gentle cycle and air dry.
  5. Where no other method is cleaning the fabric, wash with pressure washer set at wide fan, warm water, and only allow nozzle close enough as necessary for cleaning, the further away the better for the fabric.

DO NOT MACHINE DRY. DO NOT USE BLEACH.
Fill and drain hardware:

  • For NFES #000435, wash thoroughly in a solution of chlorine bleach consisting of 1-ounce of bleach for every gallon of water.
  • Rinse in potable water and dry completely.
  • Once hose and fittings are sanitized and dried, reseal in a plastic storage bag and put in zipper pocket.
  • For NFES #000437 wash, fill, and drain hardware thoroughly. Rinse and dry completely, reseal, place in plastic storage bag and put in zipper pocket.

B. Repair

  1. Repair holes, cuts, tears, and broken seams.
  2. Replace nonfunctioning buckles.
  3. Replace Velcro or zipper if it does not adhere and/or it does not operate smoothly and if it is economical to do so.
  4. NFES #000436 liner will no longer be carried at DLA. If NFES #000435 needs liners, survey due to normal wear and tear.

C. Testing for Performance

  • Test any replacement buckle, zipper, Velcro, or fitting.

D. Repackaging

  • Use NFES #008070 carton (18” x 15” x 5.5”).

 

Print PDF

NWCG Latest Announcements

2024 Paul Gleason Award Winners Announced

Date:  March 13, 2026
Questions? 
Please contact: Leadership Committee

The NWCG Leadership Committee is proud to announce the recipients of the 2024 Paul Gleason "Lead By Example" awards. Award categories include Initiative and Innovation, Mentoring and Teamwork, Motivation and Vision, as well as a Lifetime Achievement Award.

Congratulations to the awardees:

  • Justin Baxter, National Unmanned Aerial System (UAS) Operations Specialist, with the U.S. Forest Service — Initiative and Innovation
  • Kelly Woods, Director of the Wildland Firefighting Lessons Learned Center — Mentoring and Teamwork
  • Doug Booster, Instructor, ProHealth Net, Inc. — Motivation and Vision
  • Pam McDonald, Writer-Editor for the National Interagency Fire Center — Lifetime Achievement Award

References:

Paul Gleason Lead By Example Award

Wildland Fire Leadership Development Program (WFLDP)

Leadership Committee

NEW! S-231, Engine Boss Course Available Now

Date:  March 6, 2026
Questions? 
Please contact: Incident Operations Subcommittee

NWCG is pleased to announce the new S-231, Engine Boss (Single Resource) course is now available on the Wildland Fire Learning Portal (WFLP). Developed through the Incident Performance and Training Modernization (IPTM) effort, this training supports individuals working towards Engine Boss, Single Resource (ENGB) incident qualifications. 

This is a performance-based instructor-led training (ILT) that focuses on the application of ENGB responsibilities during wildland fire operations, emphasizing readiness, information gathering, risk management, engine tactics, and Wildland Urban Interface (WUI) operations. Trainees apply these skills through scenario-based group work and an optional field day that reinforces hands-on engine operation tasks. 

References:

S-231, Engine Boss (Single Resource) (Instructor-led)

NWCG Engine Boss, Single Resource (ENGB) Position Page

Wildland Fire Learning Portal

NWCG Celebrates 50 Years!

Date:  March 6, 2026
Questions? 
Please contact: NWCG Executive Secretary

NWCG is proud to celebrate 50 years of service to the wildland fire community. Beginning in 1976 with an interagency agreement between the Department of Interior and Department of Agriculture, NWCG has grown to include additional member agencies and is recognized as the standard-setting leader in wildland fire operations.

To honor where we’ve been and highlight where we are going, the NWCG team has created a video showcasing our history and accomplishments. The video is now available on the NWCG website.

References:

NWCG 50 Year Anniversary Video

NEW! S-131, Firefighter Type 1 Course Available Now

Date:  March 6, 2026
Questions? 
Please contact: Incident Operations Subcommittee

NWCG is pleased to announce the new S-131, Firefighter Type 1 course is now available on the Wildland Fire Learning Portal (WFLP). Developed through the Incident Performance and Training Modernization (IPTM) effort, this course is a performance-based instructor-led training (ILT) that focuses on the application of situational awareness and decision making, building on the knowledge and concepts introduced in previous required courses. Using a threaded fictitious fire, each unit focuses on a performance-based activity in which students practice applying their decision-making and problem-solving skills.

The S-131, Firefighter Type 1 course is required for individuals seeking qualifications to be a Firefighter Type 1 (Squad Boss) (FFT1) or an Incident Commander Type 5 (ICT5).

References:

S-131, Firefighter Type 1 (Instructor-led)

NWCG Firefighter Type 1 (Squad Boss) Position Page

NWCG Incident Commander Type 5 Position Page

Wildland Fire Learning Portal