Skip to main content

6MFS

6MFS Committee

All 6MFS Topics

6MFS Calendar

Aviation

Airtankers

Felling Safety

Fire Communication

Firefighter Health & First Aid

Leadership

Misc Fireline Hazards

Operational Engagement

This Day in History

Vehicles - Roads

Weather - Fire Behavior

Week of Remembrance

Dozer/Plow Operations

 

Dozers and tractor plows provide suppression and support capability for fire operations. When working on or around dozers on the fireline, it is important to respect the following guidelines:

  • Load/unload equipment from the transport in a safe manner on a level, stable surface.
  • Park transport in an area free of vegetative fuel. Clear an area if needed to protect parked equipment.
  • Do not sit or bed down near equipment. Walk around the equipment before starting or moving it.
  • Lower the dozer blade and/or fire plow to the ground when the equipment is idling or stopped.
  • When working around a dozer or tractor plow, stay at least 100 feet in front or 50 feet behind the equipment.
  • Allow no one but the operator to ride on the equipment.
  • Never get on or off equipment while it is moving.
  • Provide front and rear lights for equipment working at night or in heavy smoke.
  • Provide lights and fluorescent vests to personnel working with dozer/tractor plow units.
  • Use hand signals for direction and safety.
  • Do not use a dozer or tractor plow without a canopy or brush guard and radio communications.
  • Operators will wear required personal protective equipment (PPE) and carry a fire shelter.
  • Be aware of different fuel types, rates of spread, and flammability.
  • Watch for wetlands, steep slopes, rocks, ditches, and other obstacles that might stop the equipment.
  • Do not get too far ahead of a firing crew during firing operations.
  • Anchor the line to a secure firebreak and create a black line (burn out) until the fire is completely enclosed.
  • Tractor plow operators should wear headgear protection for head, face, eyes, and ears while also providing radio reception and ventilation capabilities.
  • Tractor plow crews should consist of a minimum of two people.
  • When the dozer or tractor plow is equipped with a hand-clutch lever, always take equipment out of gear when mounting and dismounting.

 

Category
Vehicles Roads
References
Safety and Occupational Health Manual Handbook, BLM-1112-1


Last Modified / Reviewed:

Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee.


Follow NWCG on Twitter and Facebook

Print PDF

NWCG Latest Announcements

New Job Aids Available: Packing Lists for Wildland Fire Fireline Personnel and Support Staff, J-101 and J-102

Date: December 3, 2024
Contact: NWCG TRAINING

Two new job aids are now available: Packing List for Wildland Fire Fireline Personnel, J-101 and Packing List for Wildland Fire Support Personnel, J-102, should serve as a baseline for items needed on a wildland fire assignment. These lists will help personnel prepare for a 14 to 21-day assignment on the fireline or in a support role.

References:

Job Aid Catalog

NWCG Packing List for Wildland Fire Fireline Personnel, J-101

NWCG Packing List for Wildland Fire Support Staff, J-102

NWCG Equipment Technology Committee Releases Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention

Date: November 14, 2024
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention. Misaligned toolless fuel caps on Stihl chainsaws have led to recurring fuel spillage, fuel ignition, and burn injuries during wildland fire management operations.

This Safety Warning is intended to highlight the details and recommended procedures for the installation of a Stihl chainsaw toolless fuel cap, as well as how to identify and correct a misaligned, damaged, or broken fuel cap to help prevent fuel spillage.

References:

NWCG Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention

Advertencia de equipos 24-001: Prevención de derrames de la tapa de combustible sin herramientas de la motosierra Stihl

NWCG Alerts

The Incident Position Standards and Next Generation Position Task Book are now available for Equipment Time Recorder (EQTR)

Date: November 13, 2024
Contact: Incident Business Committee

NWCG is excited to announce that the NWCG Incident Position Standards for Equipment Time Recorder, PMS 350-51 and NWCG Position Task Book for Equipment Time Recorder (EQTR), PMS 311-51 are now available.

The Performance Support Package, which for EQTR, includes the Incident Position Standards and Next Generation Position Task Book were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Equipment Time Recorder Position Page

NWCG Incident Position Standards for Equipment Time Recorder, PMS 350-51

NWCG Position Task Book for Equipment Time Recorder (EQTR), PMS 311-51

The Incident Position Standards and Next Generation Position Task Book are now available for Personnel Time Recorder (PTRC)

Date: November 13, 2024
Contact: Incident Business Committee

NWCG is excited to announce that the NWCG Incident Position Standards for Personnel Time Recorder, PMS 350-53 and NWCG Position Task Book for Personnel Time Recorder (PTRC), PMS 311-53 are now available.

The Performance Support Package, which for PTRC, includes the Incident Position Standards and Next Generation Position Task Book were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Personnel Time Recorder Position Page

NWCG Incident Position Standards for Personnel Time Recorder, PMS 350-53

NWCG Position Task Book for Personnel Time Recorder (PTRC), PMS 311-53