Skip to main content

Waterbag - 5 gl, suppression, M2015

NFES #
000908
Category
Water Handling
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria    

  1. Inspect vinyl, fabric, and webbing for any holes, cuts, tears, burns, or torn seams that are not economically repairable, if any dispose of.
  2. Inspect plastic cap and fittings for cracks, breaks, missing gaskets or other damage.
  3. If bag appears to be used, inflate bag with air (<10 psi), submerge in water and check for leaks.  Dry vinyl and mark holes with black marker for patching in repair process.
  4. Inspect for any missing fasteners or that does not provide adequate closure.
  5. Inspect for excessive dirt or fuel stains that cleaning cannot eliminate, dispose of.
  6. Inspect for any writings, drawings. Dispose of if cleaning cannot remove markings.
  7. Return to stock if item does not show any signs of use and passes visual inspection.
  8. Refurbish if damage detected is repairable.
  9. Dispose of item if unable to repair.

Refurbishing Procedures

A. Cleaning

  1. Remove straps and clean exterior of bag thoroughly with filler cap attached.
  2. Support or hang bag, remove cap and fill with water to rinse out tank.
  3. Replace cap and shake bag vigorously until all foreign matter is removed.
  4. Drain completely.
  5. Invert bag after removing cap and empty as much water as possible.
  6. Let dry inverted for 1 hour in sun, if possible.
  7. Clean the straps with mild detergent and stiff bristle brush, machine launder, or gently pressure wash. Hang to dry.

B. Repair

  1. Patch any hole or tears.  No more than 3 patches should be present on the bag.  If more, dispose of bag.  Small pin hole can be repaired with TEAR-AID® Type B or other similar material recommended by the tank manufacturer.
  2. Larger holes can be repaired utilizing vinyl welding tools and techniques if available.
  3. Holes in the seams may not be repairable.
  4. Place patch on damaged area and apply pressure with roller or suitable device for at least 1 minute.
  5. The filler neck and cap can be replaced following the instructions included in the Fedco Bag Filler Neck Service Kit, part #181874.
  6. Repair or replace any damaged components on bag or straps.
  7. Ensure bags are stenciled with “non-potable” or “suppression use only.”

C. Testing for Performance

  1. Re-inspect any patches or repairs.
  2. Fill with air (<10 psi).  Spray patched area with soapy water and inspect for leaks.

D. Repackaging

  1. 8 each in NFES 002006 carton (23” x 19” x 10”)

 

NWCG Latest Announcements

2024 Week of Remembrance

Date: June 27, 2024
Contact: 6 Minutes for Safety Subcommittee 

As we approach the 2024 Week of Remembrance (WOR), June 30 to July 6, we dedicate this time to thoughtfully reviewing and recognizing the events of the 2018 Mendocino Complex. As such, this year’s theme of “Learning From the Mendocino Complex” embodies a longstanding hallmark of WOR, honoring through learning.

Throughout the week, our energy will be directed toward fostering generative conversations in briefing rooms and at tailgates.

References:

6 Minutes for Safety - 2024 Week of Remembrance

Wildland Fire Lessons Learned Center

Updated NWCG Wildland Fire Risk and Complexity Assessment, PMS 236

Date: June 24, 2024
Contact: Incident and Position Standards Committee 

The June 2024 update of the NWCG Wildland Fire Risk and Complexity Assessment, PMS 236, is now available to meet the current needs for incident management typing.

The NWCG Wildland Fire Risk and Complexity Assessment should be used to evaluate firefighter safety issues, assess risk, and identify the appropriate incident management organization based on incident complexity. Assessing risk, determining incident complexity, and identifying an appropriate incident management organization is a subjective process based on examining a combination of indicators or factors, which can change over time.

References:

NWCG Wildland Fire Risk and Complexity Assessment, PMS 236

Operations Branch Director (OPBD) Next Gen PTB Available

Date: June 10, 2024
Contact: NWCG Feedback 

The NWCG Position Task Book for Operations Branch Director (OPBD), PMS 311-109 is now available for use within the OPBD position qualification pathway. As part of the transition to Complex Incident Management (CIM), the OPBD Next Gen PTB was developed and the position qualification pathway updated.

More information about the Next Gen PTB format can be found on the NWCG Position Task Book webpage.

References:

Operations Branch Director Position Page

Operations Branch Director Next Gen PTB

NWCG Position Task Books

Updated NWCG Standards for Interagency Incident Business Management, PMS 902

Date: June 5, 2024
Contact: NWCG Incident Business Committee 

The 2024 revision of the NWCG Standards for Interagency Incident Business Management, PMS 902 is now available. The uniform application of interagency incident business management standards is critical to interagency fire operations. PMS 902 assists NWCG agencies in constructively working together to provide effective execution of each agency's incident business management program.

References:

PMS 902