Skip to main content

No Communication Link with Crewmembers or Supervisor

Watch Out Situation #7 is a danger that must be mitigated by maintaining good communications while working on fires. Firefighters must constantly ask themselves the following questions as situations change on the fireline:

7. No communication link with crewmembers or supervisor. Firefighters and a white fire engine are all located apart from one another in a heavily timbered area, with trees and distance between them.
7. No communication link with crewmembers or supervisor. 
Known radio frequencies and channels enable instant communication within and between firefighting resources. This Watch Out shows a crew physically separated without any obvious method for communication among crew members or their supervisor. 
Read about all 18 Watch Out Situations.

Can communication(s) be established?

  • Talk about how communications are set up on fires, including the variables that must be considered.
  • Review situations where communications were a problem. Discuss what was done to fix the problem.
  • Ask yourself, “Do we need a repeater setup or can an experienced firefighter act as a human repeater?”

Is the communication triangle complete?

  • Review the communication triangle: speaker, message, and audience. Discuss where it comes up in the 10 Standard Fire Orders and the 18 Watch Out Situations.
  • Discuss ways that firefighters can maintain the communication triangle on the fireline.

How can we reduce the risks?

  • If the situation is complex, wait until communications are in place.
  • Talk about the fires where crews had to leave the line, did not go out on the line, or something negative happened because communications were inadequate. Discuss what was done to establish communications in these situations.
  • Discuss scenarios in which communications could be disrupted. What are some possible solutions?

 

Last Modified / Reviewed:

Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee.


Follow NWCG on Twitter and Facebook

NWCG Latest Announcements

Updated NWCG Standards for Water Scooping Operations, PMS 518

Date: December 19, 2024
Contact: Water Scooper Operations Unit

The NWCG Standards for Water Scooping Operations, PMS 518 establishes the standards for dispatching, utilizing, and coordinating water scooping aircraft on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, and any local, state, or geographic/regional water scooping plans.

References:

NWCG Standards for Water Scooping Operations, PMS 518

Updated NWCG Standards for Aerial Supervision, PMS 505

Date: December 19, 2024
Contact: Interagency Aerial Supervision Subcommittee

The Interagency Aerial Supervision Subcommittee has updated the NWCG Standards for Aerial Supervision, PMS 505. PMS 505 establishes standards for aerial supervision operations for national interagency wildland fire operations. 

References:

NWCG Standards for Aerial Supervision, PMS 505

New Job Aids Available: Packing Lists for Wildland Fire Fireline Personnel and Support Staff, J-101 and J-102

Date: December 3, 2024
Contact: NWCG TRAINING

Two new job aids are now available: Packing List for Wildland Fire Fireline Personnel, J-101 and Packing List for Wildland Fire Support Personnel, J-102, should serve as a baseline for items needed on a wildland fire assignment. These lists will help personnel prepare for a 14 to 21-day assignment on the fireline or in a support role.

References:

Job Aid Catalog

NWCG Packing List for Wildland Fire Fireline Personnel, J-101

NWCG Packing List for Wildland Fire Support Staff, J-102

NWCG Equipment Technology Committee Releases Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention

Date: November 14, 2024
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention. Misaligned toolless fuel caps on Stihl chainsaws have led to recurring fuel spillage, fuel ignition, and burn injuries during wildland fire management operations.

This Safety Warning is intended to highlight the details and recommended procedures for the installation of a Stihl chainsaw toolless fuel cap, as well as how to identify and correct a misaligned, damaged, or broken fuel cap to help prevent fuel spillage.

References:

NWCG Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention

Advertencia de equipos 24-001: Prevención de derrames de la tapa de combustible sin herramientas de la motosierra Stihl

NWCG Alerts