A unit of pressure equal to a force of 1,000 dynes per square centimeter. (A dyne is the force that would give a free mass of one gram an acceleration of one centimeter per second per second).

Foam designed for use on Class B or flammable liquid fires; made from fluorocarbon-based surfactants, therefore capable of strong filming action, but incapable of efficient wetting of Class A fuels.

According to the American Meteorological Society, an atmospheric anticyclonic circulation, a closed circulation. The wind in an anticyclone is in the clockwise direction in the Northern Hemisphere.

An area on the earth's surface where atmospheric pressure is at a relative maximum. Winds blow clockwise around highs in the Northern Hemisphere but, due to friction with the earth's face, tend to cross constant pressure lines away from the high center. Air is usually subsiding above a surface high. This causes warming due to air compression. This results in stable atmospheric conditions and light surface winds. 

An elongated area of relatively high atmospheric pressure extending from the center of a high-pressure region.

Noncollapsible suction hose attached to a pump and used to draft water from a source lower than the pump. Customary hose sizes in wildland fire engines are 2 and 2-1/2 inches in diameter (51 and 64 mm).

Heat transfer through a material from a region of higher temperature to a region of lower temperature.

Common type of fire hose nozzle permitting stream flow to be controlled by the firefighter at the nozzle rather than only at the source of supply.

The process that all incident personnel and equipment from associated organizations use to maintain information regarding the location and status of resources ordered for or assigned to an incident.

A legally enacted time during which burning activities are regulated by federal, state or local authority.