Skip to main content

Logistics Section Chief Type 1*

LSC1 decorative banner: photos depicting LSC1 position. LSC1 Position Description: The Logistics Section Chief (LSC1), a member of the General Staff, is responsible for providing facilities, services, and material in support of the incident. The Logistics Section Chief participates in developing and implementing the IAP and activates and supervises the Branches and Units within the Logistics Section.

The Logistics Section Chief Type 1 (LSC1) is responsible for managing, organizing, and supervising the Logistics section on wildland fire incidents and serves as a member of the Command and General Staff (C&G) for the Incident Management Team (IMT). The LSC1 supervises the Service (Communications, Medical, and Food) (SVBD) and Support (Supply, Facilities, and Ground Support) Branch Directors (SUBD) of the Logistics functional area and reports to the Incident Commander (IC). The LSC1 works in the Logistics functional area.

The LSC1 performs position duties commensurate with Type 1 incident complexity and characteristics stated in the Interagency Standards for Fire and Fire Aviation Operations (Red Book). LSC1 and Logistics Section Chief Type 2 (LSC2) duties are identical but are performed at different complexity levels.

USWDS Paragraphs

The Forest Service and Department of Interior are enabled by Administratively Determined Pay Plans (AD Pay Plans) to hire persons for temporary duration for the following reasons:

  1. To cope with a sudden and unexpected emergency caused by a fire, or extreme fire potential, flood, storm, or any other all-hazard emergency that threatens damage to federally protected property, has the potential to cause loss of life, serious injury, public health risk, or damage to natural or cultural resources unless brought under immediate control.
  2. To provide emergency assistance to States under formalized agreements.
  3. To meet mission assignments issued by the Federal Emergency Management Agency (FEMA).

The National Wildfire Coordinating Group (NWCG) Incident Business Committee (IBC) reviews positions annually and establishes pay rate classifications for each position.

For more information on the AD Pay Plans, visit Incident Business Committee.

Date: Jan 2024

Updated Positions Qualification Requirements as follows: 

Deleted from  "These Positions Maintain Currency For LSC1" and from "LSC1 Maintains Currency For These Positions":

  • Service Branch Director (SVBD)
  • Support Branch Director (SUBD)
Date: May 2022

Added: Logistics Section Chief Complex (LSCC) to "These Positions Maintain Currency For LCS1" and "LCS1 Maintains Currency For These Positions."

Date: Oct 2021

Added: Assistant Area Commander Logistics (ACLC) to "LCS1 Maintains Currency For These Positions."

Date: Apr 2021

Added: Incident Position Description (IPD) approved.

Date: Oct 2018

Added: “Individuals utilizing this pathway must complete the Logistics Section Chief Course (E/L967) prior to position qualification.”

Date: Oct 2017

Updated: Corrected asterisk note to read: Individuals must complete the Logistics Section Chief Course (E/L967) prior to position qualification.

Date: Oct 2016

Added: of Support Branch Director (SUBD) to LSC1 Maintains Currency For These Positions.

Date: Oct 2015

Updated: Prerequisite experience modified as follows:

Satisfactory performance as a Logistics Section Chief Type 2 (LSC2).
     +
Completion and Certification of Position Task Book (311-33) as a Logistics Section Chief Type 1 (LSC1).
     OR
Satisfactory performance as a Operations Section Chief Type 1 (OSC1).
     +
Completion and Certification of Position Task Book (311-33) as a Logistics Section Chief Type 1 (LSC1) on a wildfire incident*.
     OR
Satisfactory performance as a Planning Section Chief Type 1 (PSC1).
     +
Completion and Certification of Position Task Book (311-33) as a Logistics Section Chief Type 1 (LSC1) on a wildfire incident*.
     OR
Satisfactory performance as a Safety Officer Type 1 (SOF1).
     +
Completion and Certification of Position Task Book (311-33) as a Logistics Section Chief Type 1 (LSC1) on a wildfire incident*.

Removed: of Logistics Section Chief Type 1 (LSC3) from the "These Positions Maintain Currency for LSC1" positions.
Added: of Area Commander (ACDR) for "These Positions Maintain Currency for LSC1."
Added: of Service Branch Director (SVBD) to "LSC1 Maintains Currency for These Positions."

Date: Oct 1993

Position created. 

Logistics Section Chief (Multi-Branch), Logistics Section Chief (Multi-Division) and Logistics Section Chief (Multi-Leader) in 1984 PMS 310-1.

USWDS Paragraph Bundles



Last Modified / Reviewed:

Please Provide Feedback

NWCG values your constructive input and we thank you for taking the time to provide feedback.

Although contact information is optional, we hope that you provide a way for us to contact you in case we need clarification on your comment. If you would like to be contacted regarding your feedback, you must provide contact information. 

Would you like a response?
If you would like a response, you must provide contact information (name and email) below.
One file only.
9.28 GB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, mp4, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.

NWCG Latest Announcements

NWCG Equipment Technology Committee Releases Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention

Date: November 14, 2024
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention. Misaligned toolless fuel caps on Stihl chainsaws have led to recurring fuel spillage, fuel ignition, and burn injuries during wildland fire management operations.

This Safety Warning is intended to highlight the details and recommended procedures for the installation of a Stihl chainsaw toolless fuel cap, as well as how to identify and correct a misaligned, damaged, or broken fuel cap to help prevent fuel spillage.

References:

NWCG Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention

Advertencia de equipos 24-001: Prevención de derrames de la tapa de combustible sin herramientas de la motosierra Stihl

NWCG Alerts

The Incident Position Standards and Next Generation Position Task Book are now available for Equipment Time Recorder (EQTR)

Date: November 13, 2024
Contact: Incident Business Committee

NWCG is excited to announce that the NWCG Incident Position Standards for Equipment Time Recorder, PMS 350-51 and NWCG Position Task Book for Equipment Time Recorder (EQTR), PMS 311-51 are now available.

The Performance Support Package, which for EQTR, includes the Incident Position Standards and Next Generation Position Task Book were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Equipment Time Recorder Position Page

NWCG Incident Position Standards for Equipment Time Recorder, PMS 350-51

NWCG Position Task Book for Equipment Time Recorder (EQTR), PMS 311-51

The Incident Position Standards and Next Generation Position Task Book are now available for Personnel Time Recorder (PTRC)

Date: November 13, 2024
Contact: Incident Business Committee

NWCG is excited to announce that the NWCG Incident Position Standards for Personnel Time Recorder, PMS 350-53 and NWCG Position Task Book for Personnel Time Recorder (PTRC), PMS 311-53 are now available.

The Performance Support Package, which for PTRC, includes the Incident Position Standards and Next Generation Position Task Book were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Personnel Time Recorder Position Page

NWCG Incident Position Standards for Personnel Time Recorder, PMS 350-53

NWCG Position Task Book for Personnel Time Recorder (PTRC), PMS 311-53

NWCG Risk Management Committee Releases Safety Bulletin: 24-001 Use of Respirators on Wildland Fires

Date: November 7, 2024
Contact: Risk Management Committee

The Risk Management Committee (RMC) has released Safety Bulletin: 24-001 Use of Respirators on Wildland Fires. As wildland fire respirators are available through several established vendors, wildland fire personnel need to understand regulations and limitations of respirator use in the workplace.

Safety Bulletin 24-001 outlines the following topics regarding respirator use for wildland fires:

  • Requirements for Respirator Use
  • Voluntary Respirator Use
  • Current Respirator Options
  • Unknown Risks of Respirator Use

This bulletin also provides mitigation recommendations to help reduce smoke exposure for wildland firefighting efforts.

References:

NWCG Safety Bulletin: 24-001 Use of Respirators on Wildland Fires

NWCG Smoke Management Guide for Prescribed Fire, PMS 420-3

VIDEO: Protecting Wildfire Personnel from Smoke - How Incident Management Teams Address Smokes Risks

VIDEO: Smoke, Knowing the Risks