Skip to main content

Repair Map

Product Description

The Repair Map is used to assist in tracking suppression repair efforts in the area of the incident. This product is used in operational planning and public meetings.

Target Audience

Operations Section, Resource Advisors, Agency Administrators, Local Unit. 

Guidelines

  • Standard Incident Command System (ICS) symbology.
  • Size varies but usually anywhere from tabloid (11” x 17”) to “Arch E” (36” x 48”) size.
  • Scale varies based on request, area covered, and map size.
  • May be one map for the entire incident or multiple maps for various areas of interest.
  • Distribution through the web should be considered.

Standard Elements

All map products produced should include the STANDL-SGD cartographic elements.

Data

  • Repair Status Layer.
  • Wildfire Daily Fire Perimeter (Polygon) with Contained and Uncontained Perimeter Lines.
  • Event Lines (including, but not limited to: Completed lines, Access Routes, Escape Routes).
  • Repair category Event Points (including, but not limited to: Culvert, Dozer Push, Fence – Cut/Damaged) .
  • Event Points (including, but not limited to: Camps, Dip Sites, Draft Sites, Drop Points, Helispots, Helibase).
  • Accountable Property.
  • Assignment (Division, Branch, Zone) breaks and labels.
  • Land Ownership / Jurisdiction.
  • Special Management Areas (including, but not limited to: Wilderness, Wilderness Study Areas, Inventoried Roadless Areas).
  • Structures.
  • Utilities (including, but not limited to: Powerlines, Substations, Pipelines).
  • Topographic or Orthoimagery Base.
  • Other Situation Unit Leader (SITL)-requested data.

Examples

These are examples from actual incidents and may include non-standard elements.
Also note that examples use the standard symbols at the time of their creation and may not reflect the current GeoOps symbology. Map elements, incident features, and composition remain consistent across these visual changes.

 

Last Modified / Reviewed:

Print PDF

NWCG Latest Announcements

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508